Pelican Wireless TC1 Commercial Thermostat

Overview

Part of the Pelican Wireless system. See the system overview for component roles and selection requirements.

The TC1 is a touchscreen thermostat for commercial spaces using Pelican building controls. It combines local temperature adjustment with centrally managed schedules and operating information through the Pelican web application. TC1 provides temperature sensing without the built-in humidity or carbon-dioxide sensors offered on other TC models.

Equipment and system requirements

A Pelican Gateway is required to configure and manage this thermostat. Its radio communicates over Pelican’s mesh network rather than directly over Wi-Fi. Check the building’s gateway and network arrangement before selecting this product.

The installation guide covers conventional equipment, heat pumps and two- or four-pipe fan coils. Output assignments change with the equipment and fan configuration; the guide must be checked against the actual system. Pelican zone-damper applications use additional system components and their separate installation guide.

Occupant controls and scheduling

The touch interface supports local adjustment subject to administrator restrictions. The system provides daily, weekday/weekend and seven-day scheduling, temporary schedule overrides, vacation operation, keypad lockout and adjustable heat/cool setpoint limits.

Installation considerations

This is a hardwired 24 V AC device. The supplied limited-wiring module can be used where the equipment-to-thermostat connection has at least three suitable conductors. It does not eliminate the need for power and a common connection at the installed components. Use the model-specific manual for wiring and siting.

Technical document notes

Pelican’s current series data sheet and product page disagree on dimensions and the lower ambient operating limit. Those values are intentionally omitted here pending confirmation of the applicable hardware revision.