Product selection

Compare products

Review up to four products side by side. Copy this page’s URL to share your selection.

Add another product from the catalog for a side-by-side comparison.

Compare documented specifications below. “Not specified” means the catalog has no value; it does not mean a feature or requirement is absent. Confirm system compatibility before choosing a replacement. On smaller screens, scroll the table horizontally.

Product specifications and system requirements
Specification	Honeywell T7350M1008 Commercial Modulating Thermostat
Brand	Honeywell
Model	T7350M1008
SKU	365051
Component role	Standalone
Lifecycle	Discontinued
Building systems	Not specified
Requires	Not specified
Contact ratings	Relay outputs: 1.5 A running maximum and 7.5 A inrush maximum at 30 VAC
Control signal types	Two 4–20 mA modulating outputs; 510 ohm maximum terminating resistance
Dual transformer support	Documented for T7350M; follow installation Figure 12 and jumper requirements
Heating and cooling stages	T7350M: two modulating outputs plus two relay outputs; auxiliary relay can add one heat or cool stage, subject to configuration
Keypad lockout	Two lockout levels in addition to unlocked; special keypress functions are not locked out
Operating humidity	5–90% RH, noncondensing
Operating temperature	30–110 °F (-1–43 °C)
Power consumption	5 VA maximum without load at 30 VAC, 50/60 Hz
Power sources	Hardwired AC; no batteries required
Remote sensor support	Optional room, outdoor, discharge-air and humidity inputs; select sensors from the T7350 accessory list
Schedule periods per day	Two occupied and two not-occupied periods per day
Scheduling	7-day occupied / not-occupied schedule
Setpoint limits	Occupied setpoints are constrained by configured stops, not-occupied setpoints and the heating/cooling deadband; see product data p.17
Setpoint range	Heating 40–90 °F (4–32 °C); cooling 45–99 °F (7–37 °C)
Supply voltage	24 VAC nominal (20–30 VAC), 50/60 Hz